How does a calorimetric flow switch work?

If the current presence of flow in a piping system should be monitored, a calorimetric flow switch ? also called a flow monitor ? is often used. But so how exactly does a calorimetric flow switch actually work? The following post explains this in more detail.
Calorimetric flow switches, which are often generally known as thermal flow monitors, use the physical laws of heat transport in flows. A distinction is actually made between two technical solutions: continuous and regulated heating.
Schematic illustration of a measuring probe for a calorimetric flow switch
Continuous heating
A flow switch which is using the calorimetric measuring principle consists of a measuring probe with two temperature sensors built-into it (see illustration). One of many sensors is heated continuously with the aid of a heating element (wire-wound) with a continuing heating power and measures the temperature at the heating element. The next sensor determines the temperature of the medium in the pipe. Consequently, a temperature difference occurs between your two sensors, which is registered by the electronics. The higher the flow velocity of the medium in the offing, the smaller this temperature difference is. The foundation for this is the cooling aftereffect of flowing media. Coward in the medium, which are flowing at night probe tip, collect ?packages of heat? and transport them away. The more molecules flow past, the greater the cooling effect. Content of molecules passing by increases continuously with increasing flow velocity.
Regulated heating
The measuring probe is basically identical in design: You can find two temperature sensors in the medium, among which can be heated. In this technical solution, the heating power is regulated so the temperature difference between your two temperature sensors is kept constant throughout. Consequently, because the flow velocity increases, the heating power must be increased to keep the size of the temperature difference constant. The applied heating power is thus a direct way of measuring the flow velocity in the medium.
Note
Are you experiencing further questions on the measuring principle behind the calorimetric flow switch or do you need help with the selection of this type of product? In its portfolio, WIKA includes a calorimetric flow switch for monitoring the flow of liquid media (model FSD-3). Your contact person will be happy to help you.

Leave a Comment