On-site calibration of measuring instruments is often very time-consuming and expensive. This is also true for applications with several measurands. Disempowered of this is the metering skid, something for the custody transfer measurement of the amount of natural gas transferred. A global player in the industry from Saudi Arabia has now significantly streamlined the testing process at this stage: with the multi-functional CPH8000-P1 calibrator from WIKA, a ?calibration laboratory in an incident?.
The center of a metering skid is the flow computer. It processes the information from all the measuring instruments and calculates the precise amount of natural gas that flows to the client. Natural gas is compressible, therefore the monitoring of pressure and temperature during gas transfer plays a crucial role.
Verification is the law
Because even small measuring errors could cause noticeable losses in turnover, the measuring instruments should be calibrated regularly. Normally, this is done at the facility. Each on-site calibration must be verified in accordance with regulations. This implies proving consistent repeatability of the test results and traceability to the assigned references. Furthermore, the regulations require the test equipment to be approved for used in hazardous areas.
In view of certain requirements, the calibration personnel of WIKA customers previously had to use many different pieces of equipment so as to adequately fulfil their tasks. In addition to pressure and temperature calibrators, this included a pneumatic pump for the test pressure, a HART� communicator and a resistance decoder. The on-site calibration cost effort and time accordingly.
The CPH8000-P1 multi-functional calibrator significantly reduces the effort necessary for on-site calibration.
Four measuring channels
The natural gas company in Saudi Arabia has reduced this effort in one fell swoop with the CPH8000-P1 portable multi-function calibrator from WIKA. The case-mounted instrument calibrates pressure measuring instruments and resistance thermometers and thermocouples. The test pressure is generated with an integrated pump. The CPH8000-P1 has four measuring channels. It can thus perform and display up to four measurements simultaneously. The ATEX-approved version also supplies the test items and reference sensors in the metering skid with voltage (DC 24 V) without danger.
Quickly without problems
Through the test procedure, the CPH8000-P1 ? via its integrated HART� module ? communicates directly with the measuring instruments, which may also be HART�-capable. Its powerful data logger and the very large memory capacity support the user in the next documentation of the on-site calibration. The machine provides all the information relevant for verification.
Note
Detailed info on the model CPH8000 multi-function calibrators is available on the WIKA website. Each instrument includes a modular design and can therefore be specified for the respective selection of applications. In case you have any more questions, your contact will gladly assist you to.

Leave a Reply